Nagentrau Muniandy

Nagentrau Muniandy

Email: nagentrau@uowmkdu.edu.my

Nagentrau Muniandy is a committed lecturer at School of Engineering (SOE). He received both Master and Bachelor degree in Mechanical Engineering from Universiti Tun Hussein Onn Malaysia (UTHM). He has been teaching Mechanical Engineering related subject for past 2 years and actively involving in Energy Efficiency related projects. His research interest focusing on energy efficiency, biomechanics (prosthetics), finite element method (FEM) and hardfacing welding.
Year Title
2019 Nagentrau, M., Tobi, A. M., Sambu, M., & Jamian, S. (2019). The influence of welding condition on the microstructure of WC hardfacing coating on carbon steel substrate. International Journal of Refractory Metals and Hard Materials, 82, 43-57

Omar, A. S., Nagentrau, M., Tobi, A. L. M., & Ismail, M. I. (2019, January). Wear characteristic of wc hardfacing on carbon steel: effect of weldment current and layer. In Journal of Physics: Conference Series (Vol. 1150, No. 1, p. 012036). IOP Publishing.

2018 Tobi, A. M., Nagentrau, M., Kamdi, Z., Ismail, M. I., & Omar, A. S. (2018, January). Effects of Weldment Layer on the Tungsten Carbide Hardfacing Microstructure. In IOP Conference Series: Materials Science and Engineering (Vol. 295, No. 1, p. 012041). IOP Publishing.
2017 Nagentrau, M., Tobi, A. M., Kamdi, Z., Ismail, M. I., & Sambu, M. (2017). A Study on Wear Failure Analysis of Tungsten Carbide Hardfacing on Carbon Steel Blade in a Digester Tank. Journal of Failure Analysis and Prevention, 17(5), 861-870.

Tobi, A. M., Kamdi, Z., Ismail, M. I., Nagentrau, M., Roslan, L. N. H., Mohamad, Z., & Latif, N. A. (2017, January). Abrasive Wear Failure Analysis of Tungsten Carbide Hard facing on Carbon Steel Blade. In IOP Conference Series: Materials Science and Engineering (Vol. 165, No. 1, p. 012020). IOP Publishing.

Nagentrau, M., Tobi, A. M., Kamdi, Z., Ismail, & Sambu, M. (2017, June). Microstructure Analysis of Tungsten Carbide Hardfacing on Carbon Steel Blade. In IOP Conference Series: Materials Science and Engineering (Vol. 203, No. 1, p.012014). IOP Publishing.

2016 Nagentrau, M., Siswanto, W. A., Tobi, M., & Latif, A. (2016). Predicting the sliding amplitude of plastic deformation in the reciprocating sliding contact. ARPN Journal of Engineering and Applied Sciences, 11(4), 2266-2271.

Nagentrau, M., Siswanto, W. A., & Tobi, M., Latif, A. (2016). The influence of linear kinematic hardening and non-linear combined isotropic-kinematic hardening plasticity model on sliding contact. International Journal of Mechanical & Mechatronics Engineering, 16(4), 83-88.

Siswanto, W. A., Nagentrau, M., Tobi, M., Latif, A., & Tamin, M. N. (2016). Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis. Journal of Mechanical Science and Technology, 30(11), 5093-5101.

2015 Nagentrau, M., Siswanto, W. A., Tobi, M., & Latif, A. (2015). Investigation on the effect of linear kinematic hardening model on plasticity prediction of reciprocating sliding contact. Applied Mechanics and Materials, 773-774, 183-187.

Siswanto, W. A., Nagentrau, M., Tobi, M., & Latif, A. (2015). Prediction of residual stress using explicit finite element method. Journal of Mechanical Engineering and Sciences (JMES), 9(Dec), 1556-1570.

Siswanto, W. A., Nagentrau, M., Tobi, M., Latif, A., & Tamin, M. N. (2015). Contact pressure prediction comparison using implicit and explicit finite element methods and the validation with hertzian theory. International Journal of Mechanical & Mechatronics Engineering, 15(6), 1-8.

 

Reviewer

  • Corrosion Science: The Journal on Environmental Degradation of Materials and its Control (Elsevier:Q1 journal)
  • Tribology in Industry: Journal of the Serbian Tribology Society (Q2 journal)
  • International Summit on Science Technology and Humanity (ISETH2018)
  • Mechanical Engineering, Science and Technology International Conference (MEST2018)

 

Track Director

  • Mechanical Engineering, Science and Technology International Conference (MEST2018)

Research Grant  

Title: Energy Audit Conditional Grant (EACG) Project Under RMK- 11 for UOW Malaysia KDU University College
Duration: September 2018 – On-going
Role: Project Leader

Title: Energy Assessment for a Sustainable Efficiency in Campus Environment: UOW Malaysia KDU University College Case study
Duration: September 2018 – On-going
Role: Project Leader

Title: Fretting fatigue delamination of HAp coating on Ti-6Al-4V substrate for hip implant
Duration: January 2017 – On-going
Role: Research collaboration with Nagaoka University of Technology (NUT), Japan and Universiti Tun Hussein Onn Malaysia

Title: Using Tribology Technology and Know-How at Titanium Dioxide Digestion Process To Improve Continuous Digester Blade Wear And Degradation Rates Thereby Enhancing Productivity
Duration: May 2015 – July 2017
Role: Member

Title: Formulating the Plastic Deformation Expression on Coated Substrate as a Coating Selection
Duration: September 2014 – January 2017
Role: Member

Intellectual Property

Copyright

  • Method of Hardfacing Carbon Steel Blade with Tungsten Carbide (WC).
    LY2017001848
  • Plastic Deformation Mathematical Expressions of Ceramic Coated Ti-6Al-4V and SCMV Substrates.
    LY2017001849
  • Coating Selection Tool Considering Plastic Deformation of Ceramic Coated Ti-6Al-4V and SCMV Substrates.
    LY2017001850

 

Awards and Recognitions

Best presentation award in The 5th Asian Symposium on Material and Processing 2018

Presentation award 2016 SIMULIA ASEAN Regional User Conference (ABAQUS)